Imitation Cloisonne

Each design is stamped into brass. The recessed areas are filled with imitation cloisonne enamel (PMS matched). They are then baked to harden, and the surface is ground down smooth and polished.

A modern take on the centuries old process...

Item # 300 500 1000 2500
CL075 1.70 1.60 1.54 1.50
CL100 1.90 1.80 1.74 1.70
CL125 2.48 2.40 2.32 2.24
CL150 3.40 3.16 3.04 2.96
Tooling Charge
Up to 1" $90.00(V)
Up to 1.5" $110.00(V)
Cut Out $31.25(V)
Additional Colors (4P)
  • Price includes 4 colors
  • Add $0.12(V) for each add'l color
Imitation Cloisonne with Printing

For Imitation Cloisonne designs that have some details or lines that are too thin/fine to colorfill. These details are not included in the stamping, but are screen printed on top of the enamel.

Item # 300 500 1000 2500
CLP075 1.82 1.72 1.66 1.62
CLP100 2.02 1.92 1.86 1.82
CLP125 2.60 2.52 2.44 2.36
CLP150 3.52 3.28 3.16 3.08
Tooling Charge
Up to 1" $90.00(V)
Up to 1.5" $110.00(V)
Cut Out $31.25(V)
Screen Setup $37.50(V)
Additional Colors (4P)
  • Price includes 4 enamel +1 printed
  • Add $0.12(V) for each add'l enamel or printed color
  • Add $37.50(P) for each add'l printed color
Die Struck Two Tone

Each design is stamped into brass, the same thickness as the enamel pins. The recessed areas are sandblasted or created with a texture to beautifully contrast the high polished raised details.

Item # 300 500 1000 2500
DS075 1.20 1.14 1.10 1.06
DS100 1.42 1.32 1.28 1.24
DS125 2.00 1.92 1.84 1.78
DS150 2.64 2.52 2.44 2.36
Tooling Charge
Up to 1" $90.00(V)
Up to 1.5" $110.00(V)
Cut Out $31.25(V)
(4P)
  • Price includes sandblasting
  • Antique finish add 10%
Soft Enamel Die Struck Brass

Each design is stamped into brass. The recessed areas are filled with soft enamel (PMS matched) just below the metal level, giving the appearance that the metal is raised higher.

Item # 300 500 1000 2500
SEB075 1.40 1.34 1.30 1.26
SEB100 1.56 1.52 1.48 1.44
SEB125 2.24 2.10 2.00 1.96
SEB150 2.96 2.76 2.64 2.60
Tooling Charge
Up to 1" $90.00(V)
Up to 1.5" $110.00(V)
Cut Out $31.25(V)
Additional Colors (4P)
  • Price includes 4 colors
  • Add $0.12(P) for each add'l color
  • EPOXY DOME - Add $0.10(P)
Soft Enamel Die Struck Iron

Each design is stamped into iron. The recessed areas are filled with soft enamel (PMS matched) just below the metal level, giving the appearance that the metal is raised higher.

Item # 500 1000 2500 5000 10000
SEI075 1.20 1.12 1.08 1.06 1.04
SEI100 1.28 1.20 1.16 1.12 1.08
SEI125 1.44 1.36 1.32 1.28 1.24
SEI150 1.90 1.76 1.72 1.68 1.64
Tooling Charge
Up to 1" $90.00(V)
Up to 1.5" $110.00(V)
Cut Out $31.25(V)
Additional Colors (5P)
  • Price includes 4 colors
  • Add $0.12(P) for each add'l color
  • EPOXY DOME - Add $0.10(P)
Photo Etched Soft Enamel

Designs are chemically etched onto thin sheets of brass, creating shallow recesses which are filled with soft enamel colors (PMS matched) and baked dry. It has a similar appearance to die struck pins, but is thinner and more economical.

Item # 300 500 1000 2500
SEP075 1.28 1.24 1.20 1.16
SEP100 1.46 1.40 1.36 1.30
SEP125 1.68 1.64 1.60 1.56
SEP150 2.10 2.04 2.00 1.96
Tooling Charge
Up to 1" $90.00(V)
Up to 1.5" $110.00(V)
Cut Out $31.25(V)
Additional Colors (4P)
  • Price includes 4 colors
  • Add $0.12(P) for each add'l color
  • EPOXY DOME - Add $0.10(P)
Screen Printed

PMS matched colors are screen printed directly onto a thin piece of brass, steel, or aluminum. A clear epoxy dome covering protects the imprint. This process allows for registration of colors and fine details without the need to separate colors with metal.

Item # 300 500 1000 2500
SP075 0.92 0.88 0.84 0.80
SP100 1.08 1.04 1.00 0.96
SP125 1.28 1.24 1.20 1.16
SP150 1.60 1.56 1.52 1.48
Setup Charge
Up to 1.5" $120.00(V)
Cut Out $31.25(V)
Additional Colors (4P)
  • Price includes 4 colors
  • Add $0.12(P) plus $37.50(V) setup for each add'l color
Offset Printed

Traditional 4 color process printing. Printed directly onto a thin piece of brass, steel, or aluminum. A clear epoxy dome protects the imprint. Great for artwork with gradations or lots of colors.

Item # 300 500 1000 2500
OP075 0.92 0.88 0.84 0.80
OP100 1.08 1.04 1.00 0.96
OP125 1.28 1.24 1.20 1.16
OP150 1.60 1.56 1.52 1.48
Setup Charge
Up to 1.5" $150.00(V)
Cut Out $31.25(V)
Additional Colors (4P)
  • Pricing includes unlimited colors (PMS match not available)
Die Cast

A mold is made of the design. Hot zinc is then poured into the mold. Once cooled, it is removed, cleaned up, and polished. Enamel color-fill can be added.

Great for any design with multiple cutouts, letters, or intricate 3D designs.

Item # 300 500 1000 2500
SC075 1.40 1.30 1.20 1.10
SC100 1.50 1.40 1.30 1.26
SC125 1.70 1.60 1.50 1.46
SC150 2.00 1.90 1.80 1.74
Mold Charge
Up to 1" $120.00(V)
Up to 1.5" $150.00(V)
Price Includes (4P)
  • 2D mold, no colorfills
  • Add $0.12(V) for each enamel color
  • 3D mold custom quoted